SN EN ISO 13854:2020
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)
ISO 13854:2017 enables the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. It specifies minimum gaps relative to parts of the human body and is applicable when adequate safety can be achieved by this method. ISO 13854:2017 is applicable to risks from crushing hazards only and is not applicable to other possible hazards, e.g. impact, shearing, drawing-in. NOTE For impact, shearing, drawing-in hazards, additional or other measures are to be taken.
- Originator
- SWISSMEM
- Published
- 2020-03-01
- ICS
- 13.110
SN EN ISO 13854:2020
Sicherheit von Maschinen - Mindestabstände zur Vermeidung des Quetschens von Körperteilen (ISO 13854:2017)
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)
ISO 13854:2017 enables the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. It specifies minimum gaps relative to parts of the human body and is applicable when adequate safety can be achieved by this method. ISO 13854:2017 is applicable to risks from crushing hazards only and is not applicable to other possible hazards, e.g. impact, shearing, drawing-in. NOTE For impact, shearing, drawing-in hazards, additional or other measures are to be taken.
Content pages for this standard
guide
Safety of Machinery - ISO 13854:2017 Overview (SN EN ISO 13854:2020)
Discover the ISO 13854:2017 standard for machinery safety, focusing on minimum gaps to prevent crushing hazards. Essential for compliance and safety.
Comprehensive Guide to ISO 13854:2017 Standard Details
Discover ISO 13854:2017 standard details, compliance guidelines, and implementation steps for enhancing machinery safety.
Related standards
SN EN 12101-3:2015
Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans)
SN EN 12101-2:2017
Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators
SN EN ISO 14064-3:2019
Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO 14064-3:2019)
SN EN 1127-1:2020
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
SN EN ISO 14122-1:2016
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
SN EN ISO 14040:2006
Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006)